ATAR cut-off
84.55
87.85 (Median ATAR)
About ATARs
International entry requirement

Admission to our undergraduate degree programs usually requires successful completion of a senior secondary school qualification similar to the Higher School Certificate (HSC), the highest educational award in New South Wales schools.

Find out more about entrance marks

UAC code

N/A
Newcastle

Start dates
  • Semester 1 - 26 Feb 2018
  • Semester 2 - 30 Jul 2018
Mode of delivery

Face to Face

Duration

5 years full-time or part-time equivalent up to 12 years maximum.

Location

Newcastle

Start dates
  • Semester 1 - 26 Feb 2018
English language proficiency
  • IELTS overall minimum - 6.0
  • IELTS section minimum - 6.0

Find out more about IELTS.

Duration

5 years full-time.

Mode of delivery

Face to Face

UON program code: 40091
CRICOS code: 088935C

Currently enrolled, continuing students looking for the previous version of this program should refer back to the: Bachelor of Engineering (Honours) (Mechanical) / Bachelor of Science (pre 2017)

For addtional information about this degree you can refer to the pages for the corresponding single degrees:
Bachelor of Engineering (Honours) (Mechanical), and Bachelor of Science

Program handbook

Description

The Bachelor of Engineering (Honours)(Mechanical)/Bachelor of Science combined degree program provides students with an opportunity to undertake concurrent study in mechanical engineering and science (with a major) and complete two awards. In general, this combined degree program offers greater breadth of learning, enhancing the academic and professional qualities gained in each separate degree. At the same time, it recognises the increasing need for students to graduate with multidisciplinary skills. This program offers a sound introduction to the fundamental principles of engineering science and practice as well as systems while also giving students the basic skills and knowledge to contribute to scientific development in many areas of technology, industry, agriculture or the information revolution.

Students can choose from either of the three Bachelor of Science majors (Physics or Earth Sciences or Chemistry) currently  available in this combined program.


Program learning outcomes

On successful completion of the program students will have:

  • Program Learning Outcomes as per those for the single degree programs

Details

Information correct as at23rd Oct 2017 11:14pm
Program code40091
AQF level

Level 8 Bachelor Honours Degree

Locations and UAC codes
Mode of delivery
  • Face to Face
Duration
  • Australian students - 5 years full-time or part-time equivalent.
  • International students - 5 years full-time.
ATAR (2017)
LocationCut-offMedian
Callaghan Campus84.5587.85

Find out more about ATARs

Assumed knowledgeHSC Mathematics (Band 5 or above) or equivalent. Study of one science-related subject would also be an advantage (Physics or Chemistry preferred).
Recommended studiesHSC Mathematics Extension 1 or equivalent. Study of one science-related subject would also be an advantage (Physics or Chemistry preferred).
Term typeSemesters
Fees
Managing faculty
  1. Faculty of Engineering and Built Environment
Contributing schools
  1. School of Humanities and Social Science
  2. School of Engineering
  3. School of Electrical Engineering and Computing
  4. School of Environmental and Life Sciences
  5. School of Mathematical and Physical Sciences
Relevant University rules and policies
CRICOS Code088935C

Click on the headings to show/hide sections of content. Hidden information will not be printed. Hide all sections

Admission information

Admission requirements

Admission to this program is available to Australian students, residents and international students.  Admission information for Australian students and residents is available online here. Admission information for international students can be found here. You may also be eligible to receive bonus points if you will be receiving an Australian Tertiary Admission Rank (ATAR).  Please visit our website to see if you are eligible.

International student visa holder applicants are advised that they are able to enrol in this program for commencement in Semester 1 only (there will be no mid-year intakes).

The UAC code for this program is 482620.

Enrolling in mathematics - Maths placement test

Your degree includes either compulsory or optional courses in maths. To maximise your likelihood of academic success, it is recommended that you select the course which matches your existing knowledge and understanding of maths concepts.

Answer a few questions now to find out what mathematics you should enrol in.

Minimum English language proficiency requirements

All Applicants must demonstrate that they meet the University’s English proficiency requirement. Further information regarding English language proficiency requirements can be found at the English Language Proficiency for Admission Policy here.


Credit transfer

If you wish to apply for credit for studies completed at another institution, or if you are changing programs within the University and wish to transfer your credit to the new program, visit the University's credit website and click on 'How to Apply for Credit'.


Compulsory program requirements

Requirements for qualification of this award include completion of at least 12 weeks of industrial experience of a nature acceptable to the Faculty Board. Students are encouraged to obtain and to report on a substantial block of this experience at one time but several shorter periods not less than 2 weeks duration will be accepted.


Professional recognition

Engineers Australia


Academic requirements for program completion

Total units required

400 units

Program duration

5 years full-time or part-time equivalent up to 12 years maximum.

International student visa holders who are studying the program on campus are required to enrol full time as per student visa requirements.

Program requirements

For all combined programs and in accordance with the Combined Degree Principles and Structures Guideline [000992], the core and minimum requirements for each single degree component must be met in each combined program. Consideration is given to overlapping courses and/or content where applicable, but to also ensure that accreditation is not compromised.

In the Bachelor of Engineering (Honours) (Mechanical)/Bachelor of Science program, students are required to complete 400 units.

  • The Physics Major comprises of 280 units of core courses, 30 units of compulsory courses and 90 units of directed courses.
  • The Earth Sciences Major comprises of 280 units of core courses, 60 units of compulsory courses, 50 units of directed courses, and 10 units of  electives.
  • The Chemistry Major comprises of 280 units of core courses, 80 units of compulsory courses, 30 units of directed courses, and 10 units of electives.

Note that the Physics, Earth Sciences and Chemistry majors are currently the only Bachelor of Science majors available in this combined program.

Elective courses give students the opportunity to broaden their skills and knowledge in their own or another engineering discipline; or specialise in areas such as business, maths or science; or undertake study overseas. 

The program has a duration of 5 years full time (or part time equivalent). It is possible for a student to 'step out' with a single degree award only and not complete the combined program they are enrolled in. In order to accomplish this, a student would be required to complete the single degree requirements for their preferred degree and may be required to complete any omitted courses. A student wishing to 'step out' with a single degree should contact their program convenor or program advisor for further information.

This program can be completed in five years. However, a student's choice of directed courses may lead to timetabling issues that may extend the duration of their program. Students are advised to consult with their program convenor regarding their academic program.

Please note that if you undertake courses that are not in your approved program, you will be liable for additional fees for those courses in addition to the fees associated with your normal program of study.

Students with a Band 1 or 2 in the NSW HSC course Extension 1 Mathematics OR who have completed NSW HSC Extension 2 Mathematics (or their interstate/international equivalents) are able to complete the higher level MATH1210/MATH1220 Mathematical Discovery 1/Mathematical Discovery 2 course in lieu of MATH1110/MATH1120. Please contact your program advisor if you wish to discuss this option.

Students may count PHYS1205 in lieu of PHYS1210 with program convenor approval.


Program plans

Download a program plan for further details on what you will study. Please refer to the program plan for the year that you commenced or transitioned into this program.


Program structure

Students are advised to read their program handbook information in conjunction with the program plans for course sequence/enrolment advice. Please refer to the Program Plan for the year that you commenced, or transitioned into, this program - Program Plans are available above.

Courses that are currently unavailable are hidden by default. You can show them by adjusting the advanced course filters above, or clicking the 'show all' links below each section.

Core Courses

Complete the following core courses to fulfil the requirements of this program

CodeTitleTerm / Location Units
CIVL1100Fundamentals of Engineering Mechanics
  • Summer 2 - 2018 (Callaghan)
  • Semester 2 - 2018 (BCA Singapore)
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
  • Semester 2 - 2017 (BCA Singapore)
10 units
ELEC1310Introduction to Electrical Engineering
  • Trimester 3 - 2018 (Singapore)
  • Trimester 1 - 2018 (Singapore)
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
ENGG1003Introduction to Procedural Programming
  • Trimester 2 - 2018 (Singapore)
  • Semester 1 - 2018 (Callaghan)
  • Trimester 3 - 2018 (Singapore)
  • Semester 1 - 2017 (Callaghan)
10 units
ENGG1500Introduction to Professional Engineering
  • Semester 1 - 2018 (BCA Singapore)
  • Semester 1 - 2018 (Callaghan)
  • Trimester 2 - 2018 (Singapore)
  • Trimester 3 - 2018 (Singapore)
  • Semester 1 - 2017 (Callaghan)
  • Trimester 3 - 2017 (Singapore)
  • Semester 1 - 2017 (BCA Singapore)
10 units
MATH1110Mathematics for Engineering, Science and Technology 1
  • Semester 1 - 2018 (BCA Singapore)
  • Semester 1 - 2018 (Callaghan)
  • Trimester 2 - 2018 (Singapore)
  • Trimester 3 - 2018 (Singapore)
  • Trimester 1 - 2018 (Singapore)
  • Semester 2 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
  • Semester 1 - 2017 (BCA Singapore)
  • Semester 2 - 2017 (Callaghan)
  • Trimester 3 - 2017 (Singapore)
10 units
MATH1120Mathematics for Engineering, Science and Technology 2
  • Trimester 1 - 2018 (Singapore)
  • Semester 1 - 2018 (Callaghan)
  • Trimester 2 - 2018 (Singapore)
  • Trimester 3 - 2018 (Singapore)
  • Semester 2 - 2018 (BCA Singapore)
  • Summer 2 - 2018 (Callaghan)
  • Semester 2 - 2018 (Callaghan)
  • Summer 2 - 2017 (Callaghan)
  • Trimester 1 - 2017 (Singapore)
  • Semester 2 - 2017 (BCA Singapore)
  • Semester 2 - 2017 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
MECH1110Mechanical Drawing/CAD and Workshop Practice
  • Trimester 3 - 2018 (Singapore)
  • Trimester 1 - 2018 (Singapore)
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
PHYS1210Advanced Physics I
  • Semester 1 - 2018 (Callaghan)
  • Trimester 2 - 2018 (Singapore)
  • Trimester 3 - 2018 (Singapore)
  • Trimester 1 - 2018 (Singapore)
  • Semester 2 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
  • Trimester 3 - 2017 (Singapore)
10 units
ENGG2440Modelling and Control
  • Semester 2 - 2018 (Callaghan)
10 units
ENGG2500Sustainable Engineering Practice
  • Semester 1 - 2018 (BCA Singapore)
  • Semester 1 - 2018 (Callaghan)
10 units
MATH2310Calculus of Science and Engineering
  • Summer 2 - 2018 (Callaghan)
  • Semester 1 - 2018 (Callaghan)
  • Trimester 2 - 2018 (Singapore)
  • Semester 2 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
  • Trimester 2 - 2017 (Singapore)
  • Semester 2 - 2017 (BCA Singapore)
  • Semester 2 - 2017 (Callaghan)
10 units
MECH2110Mechanical Engineering Design 1
  • Semester 1 - 2018 (Callaghan)
  • Trimester 2 - 2018 (Singapore)
  • Trimester 3 - 2018 (Singapore)
  • Trimester 2 - 2017 (Singapore)
  • Semester 1 - 2017 (Callaghan)
10 units
MECH2250Materials Science and Engineering 1
  • Trimester 2 - 2018 (Singapore)
  • Semester 2 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
  • Trimester 2 - 2017 (Singapore)
10 units
MECH2360Dynamics of Machines
  • Semester 1 - 2018 (Callaghan)
10 units
MECH2430Mechanics of Solids 1
  • Semester 2 - 2018 (Callaghan)
10 units
MECH2450Engineering Computations 2
  • Trimester 3 - 2018 (Singapore)
  • Semester 2 - 2018 (Callaghan)
  • Trimester 1 - 2017 (Singapore)
  • Semester 2 - 2017 (Callaghan)
10 units
MECH2710Fluid Mechanics 1
  • Semester 2 - 2018 (Callaghan)
10 units
ENGG3500Managing Engineering Projects
  • Trimester 1 - 2018 (Singapore)
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
MECH3110Mechanical Engineering Design 2
  • Trimester 3 - 2018 (Singapore)
  • Semester 2 - 2018 (Callaghan)
  • Trimester 2 - 2017 (Singapore)
  • Semester 2 - 2017 (Callaghan)
10 units
MECH3400Materials Science and Engineering 2
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
  • Trimester 3 - 2017 (Singapore)
10 units
MECH3695Heat TransferNot currently offered10 units
MECH3720ThermodynamicsNot currently offered10 units
MECH3780Fluid Mechanics 2 and CFDNot currently offered10 units
ENGG4500Engineering Complexity
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
MECH4410Mechanics of Solids 2 and FEANot currently offered10 units
MECH4841AMechanical Engineering Project A
  • Semester 2 - 2018 (Callaghan)
  • Semester 1 - 2018 (Callaghan)
  • Trimester 3 - 2018 (Singapore)
  • Semester 1 - 2017 (Callaghan)
  • Trimester 2 - 2017 (Singapore)
  • Trimester 3 - 2017 (Singapore)
  • Semester 2 - 2017 (Callaghan)
10 units
MECH4841BMechanical Engineering Project B
  • Semester 2 - 2018 (Callaghan)
  • Trimester 1 - 2018 (Singapore)
  • Semester 1 - 2018 (Callaghan)
  • Trimester 1 - 2017 (Singapore)
  • Semester 1 - 2017 (Callaghan)
  • Trimester 3 - 2017 (Singapore)
  • Semester 2 - 2017 (Callaghan)
20 units

Physics Major

Compulsory Courses

Students must complete the following compulsory courses

CodeTitleTerm / Location Units
PHYS1220Advanced Physics II
  • Trimester 2 - 2018 (Singapore)
  • Trimester 3 - 2018 (Singapore)
  • Trimester 1 - 2018 (Singapore)
  • Semester 2 - 2018 (Callaghan)
  • Trimester 1 - 2017 (Singapore)
  • Semester 2 - 2017 (Callaghan)
10 units
PHYS2170Quantum Mechanics and Semiconductor Physics
  • Semester 1 - 2018 (Callaghan)
  • Trimester 2 - 2018 (Singapore)
  • Semester 1 - 2017 (Callaghan)
  • Trimester 2 - 2017 (Singapore)
10 units
PHYS2260Electromagnetism
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
Statistics Directed Courses

Choose 10 units from the following courses

CodeTitleTerm / Location Units
STAT1070Statistics for the Sciences
  • Summer 2 - 2018 (Callaghan)
  • Semester 1 - 2018 (Callaghan)
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2018 (Central Coast)
  • Summer 2 - 2017 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
  • Semester 2 - 2017 (Central Coast)
10 units
STAT2010Fundamentals of Statistics
  • Semester 2 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
Physics Directed Courses 2000 Level

Choose 20 units from the following 2000 level courses

CodeTitleTerm / Location Units
PHYS2160Modern Optics
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
PHYS2240Atomic and Nuclear Physics
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
PHYS2250Classical Mechanics and Special Relativity
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
Physics Directed Courses 3000 Level

Choose 60 units from the following 3000 level courses (minimum 30 units of PHYS courses)

CodeTitleTerm / Location Units
MATH3242Complex Analysis
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
MATH3820Numerical Methods
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
MATH3830Operations Research 2
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
MATH3840Optimisation in Business and Industry
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
PHIL3070Scientific Knowledge and Scientific Method
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2018 (Online)
  • Semester 2 - 2017 (Callaghan)
  • Semester 2 - 2017 (Online)
10 units
PHYS3310Lasers and Applications
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
PHYS3330Industrial Project and Seminar
  • Semester 1 - 2018 (Callaghan)
  • Semester 2 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
PHYS3345Optical Fibre Technology
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
PHYS3350Quantum, Atomic and Molecular Physics
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
PHYS3360Advanced Electromagnetism
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
PHYS3375Statistical Mechanics and Transport Processes
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
PHYS3390Solid State and Nanoscience
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
PHYS3990Specialist Topics in Physics
  • Semester 1 - 2018 (Callaghan)
  • Semester 2 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
STAT3100Total Quality Management
  • Semester 2 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
STAT3170Surveys and Experiments
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units

Earth Sciences Major

Compulsory Courses

Students must complete the following compulsory courses

CodeTitleTerm / Location Units
GEOS1040Earth's Dynamic Systems
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
GEOS1050Earth Processes and Products
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
STAT1070Statistics for the Sciences
  • Summer 2 - 2018 (Callaghan)
  • Semester 1 - 2018 (Callaghan)
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2018 (Central Coast)
  • Summer 2 - 2017 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
  • Semester 2 - 2017 (Central Coast)
10 units
GEOS2080Earth Science Field Course
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
GEOS2161GIS and Remote Sensing
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2018 (Central Coast)
  • Semester 2 - 2017 (Callaghan)
  • Semester 2 - 2017 (Central Coast)
10 units
GEOS3250Geographic Information Systems
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
Earth Sciences Directed Courses 2000 Level

Choose 10 units from the following 2000 level courses

CodeTitleTerm / Location Units
GEOS2050River Basin Processes
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
GEOS2060Soil Properties and Processes
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
GEOS2170Optical Mineralogy and Igneous Petrology
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
GEOS2190Structural and Field Geology
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
GEOS2200Earths Sedimentary Rocks and Environments
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
PHYS2300Energy and the Environment
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2018 (Central Coast)
  • Semester 2 - 2017 (Callaghan)
  • Semester 2 - 2017 (Central Coast)
10 units
Earth Sciences Directed Courses 3000 Level

Choose 30 units from the following 3000 level courses

CodeTitleTerm / Location Units
ENVS3007Environmental Remediation
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
GEOS3110Igneous Petrology and Crustal Evolution
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2018 (Callaghan Distance)
  • Semester 2 - 2017 (Callaghan)
  • Semester 2 - 2017 (Callaghan Distance)
10 units
GEOS3160Geology of Coalfields and Fuels
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
GEOS3170Resource and Exploration Geology
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
GEOS3220Coastal Environments and Processes
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
GEOS3260Ancient Weather Stations of Australia:Field Course on Carbonate EnvironmentsNot currently offered10 units
GEOS3320Earth Sciences Placement
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
GEOS3330Metamorphic and Field Geology
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
GEOS3340Resource Management and Climate Change
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
Mechanical Engineering Directed Courses

Choose 10 units from the following courses

CodeTitleTerm / Location Units
MECH3130Mechanics of Bulk Solids and Particulates
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
MECH4220Bulk Materials Handling and Transportation
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
MECH4580Computer Aided Engineering and Manufacturing
  • Semester 1 - 2018 (Callaghan)
  • Trimester 1 - 2017 (Singapore)
  • Semester 1 - 2017 (Callaghan)
10 units
MECH4830Engineering Economic Analysis
  • Semester 1 - 2018 (Callaghan)
  • Trimester 2 - 2018 (Singapore)
  • Trimester 1 - 2017 (Singapore)
  • Semester 1 - 2017 (Callaghan)
10 units
Electives

Complete 10 units of electives to fulfil the requirements of the program. Electives can be used to extend and complement your core studies with more courses in the same field of study, or from areas that might be of interest to you. Electives can be chosen from all courses available at the University that do not have any other conditions (such as a course requisite) applied to them.

10 units

Chemistry Major

Compulsory Courses

Students must complete the following compulsory courses

CodeTitleTerm / Location Units
CHEM1010Introductory Chemistry I
  • Summer 2 - 2018 (Callaghan)
  • Semester 1 - 2018 (Callaghan)
  • Winter - 2018 (Callaghan)
  • Summer 2 - 2017 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
  • Winter - 2017 (Callaghan)
10 units
CHEM1020Introductory Chemistry II
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
STAT1070Statistics for the Sciences
  • Summer 2 - 2018 (Callaghan)
  • Semester 1 - 2018 (Callaghan)
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2018 (Central Coast)
  • Summer 2 - 2017 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
  • Semester 2 - 2017 (Central Coast)
10 units
CHEM2110Analytical Chemistry
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
CHEM2210Inorganic Chemistry
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
CHEM2310Organic Chemistry
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
CHEM2410Physical Chemistry
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
CHEM3590Chemistry Research Project
  • Semester 2 - 2018 (Callaghan)
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
  • Summer 1 - 2018 (Callaghan)
10 units
Chemistry Directed Courses 3000 Level

Choose 30 units from the following 3000 level courses

CodeTitleTerm / Location Units
CHEM3110Instrumental Chemical Analysis
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
CHEM3210Metal Complexation, Structure and ReactivityNot currently offered10 units
CHEM3310Molecular Organic Synthesis
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
CHEM3410Energy and Structure
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
10 units
CHEM3550Medicinal and Biological Chemistry
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
CHEM3560Materials Chemistry: Solids and Semiconductors
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
CHEM3570Spectroscopic Characterisation of CompoundsNot currently offered10 units
CHEM3580Polymers and Colloids
  • Semester 2 - 2018 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
10 units
CHEM3590Chemistry Research Project
  • Semester 2 - 2018 (Callaghan)
  • Semester 1 - 2018 (Callaghan)
  • Semester 1 - 2017 (Callaghan)
  • Semester 2 - 2017 (Callaghan)
  • Summer 1 - 2018 (Callaghan)
10 units
Electives

Complete 10 units of electives to fulfil the requirements of the program. Electives can be used to extend and complement your core studies with more courses in the same field of study, or from areas that might be of interest to you. Electives can be chosen from all courses available at the University that do not have any other conditions (such as a course requisite) applied to them.

10 units

Additional information

All students can access additional learning development mechanisms provided by the Centre for Teaching and Learning.

Aboriginal and Torres Strait Islander students can draw on the assistance and support provided by the Indigenous Student Support and Development service through The Wollotuka Institute.


International students

All International Students enrolled in the program will be provided with an orientation to familiarise them with the rules, expectations, facilities and services offered by the University. Please visit our International Students website to find out more about the support services available to international students.


Additional support

AccessAbility provides advice and reasonable adjustments to Students with a medical or health condition or disability. If you require adjustments to undertake your program,  contact the Student Support Advisors - AccessAbility  before semester or early in the semester. They will work with the Faculty or School to ensure that this happens in a timely manner.

Please note: All students must fulfil the inherent requirements of the programs and courses they are undertaking. While reasonable adjustments can be made, these adjustments cannot compromise academic integrity. It is the student's responsibility to check all the requirements of courses, and consider the effects of any medical condition or disability on their ability to complete course requirements. More information is available online