Final year projects

On the 24th of November 2011, students from the School of Electrical Engineering and Computer Science presented their final year projects to staff, students, friends, family and members of industry.

Our students have tackled a diverse range of topics that have required them to demonstrate the skills and knowledge they have learnt throughout their degrees.

The work presented on the day represents a year’s worth of research, development, manufacturing and testing to deliver their final year project.

Check out what some of our electrical engineering students have to say about their final year projects.

Gallery

<p>Adam Gibson and Jemima Jackson enjoying lunch on the day of their final year project presentations.</p><p>Ashley Craig with his final year project titled &#34;Guitar Amplifier.&#34; The project was supervised by Professor Brett Ninness.</p><p>Dallas Edwards with his final year project titled &#34;Renewable Energy Source Emulator.&#34; The project was supervised by Dr Colin Coates.</p><p>Brett Edman with his final year project titled &#34;Control of Hybrid Power Plants.&#34; The project was supervised by Dr Chris Kellett.</p><p>Matthew Jolliffe with his final year project titled &#34;Measurements.&#34; The project was supervised by Dr Terry Summers.</p><p>Parth Shah with his final year project titled &#34;Dual Stage xy Table.&#34; The project was supervised by Prof Minyue Fu.</p><p>Lim Li Tjun with his final year project titled &#34;Design and Development of an Intelligent Multi Intersection Traffic Light System.&#34; The project was supervised by A/Prof Jamil Khan.</p><p>Nicholas Lijic with his final year project titled &#34;Ball-in-Tubes Experiment.&#34; The project was supervised by A/Prof Jose DeDona.</p><p>Jemima Jackson with her final year project titled &#34;High Performance Control of a Nine-phase Synchronous Reluctance Drive.&#34; The project was supervised by Dr Colin Coates.</p><p>Ashley Craig with his final year project titled &#34;Guitar Amplifier.&#34; The project was supervised by Prof Brett Ninness.</p><p>Matthew Jolliffe with his final year project titled &#34;Measurements.&#34; The project was supervised by Dr Terry Summers.</p><p>Benjamin Staddon and members of industry with his final year project titled &#34;Singleton 66kV Network System Modelling.&#34; The project was supervised by Dr Terry Summers.</p><p>Nathan Marks with his final year project titled &#34;Microgrid Isolation Device.&#34; The project was supervised by Dr Colin Coates.</p><p>Brett Edman with his final year project titled &#34;Control of Hybrid Power Plants.&#34; The project was supervised by Dr Chris Kellett.</p><p>Michael Dalton with his final year project titled &#34;Solar panel battery charger/load controller.&#34; The project was supervised by Dr Galina Mirzaeva.</p><p>Blake Welsh with his final year project titled &#34;Factor Correction.&#34; The project was supervised by Dr Terry Summers.</p><p>PHD student Aaron Wong demonstrating his work with the NUBots. </p><p>PHD student Aaron Wong demonstrating his work with the NUBots. </p><p>PHD students Aaron Wong and Kenny Hong demonstrating their work with the NUBots.</p><p>Blake Welsh with his final year project titled &#34;Factor Correction.&#34; The project was supervised by Dr Terry Summers.</p><p>Samanth Murali with his final year project titled &#34;Electric Core Imperfection Detector.&#34; The project was supervised by A/Prof Steve Weller.</p><p>Lewie Catt with his final year project titled &#34;GPS swimtracker.&#34; The project was supervised by A/Prof Steve Weller.</p><p>Stephen Lilliss and members of industry with his final year project titled &#34;132kV Network – Performance of HV Insulation Under Polluted Conditions.&#34; The project was supervised by Dr Terry Summers.</p><p>Adam Gibson with his final year project titled &#34;3-D Surveillance System.&#34; The project was supervised by Steve Mitchell.</p><p>Michael Wood with his final year project titled &#34;Direct Torque Control for an AC Drive.&#34; The project was supervised by Dr Galina Mirzaeva.</p><p>Murray White discussing his final year project titled &#34;State Estimation of Power Networks&#34; with PHD student Elizabeth Mole. The project was supervised by Prof Minyue Fu.</p><p>Stephen Lilliss discussing his final year project titled &#34;132kV Network – Performance of HV Insulation Under Polluted Conditions&#34; with a member of industry. The project was supervised by Dr Terry Summers.</p><p>Michael Wood with his final year project titled &#34;Direct Torque Control for an AC Drive.&#34; The project was supervised by Dr Galina Mirzaeva.</p><p>Adam White with his final year project titled &#34;Transformer Frequency Response Analyser.&#34; The project was supervised by Steve Mitchell.</p><p>Samanth Murali with his final year project titled &#34;Electric Core Imperfection Detector.&#34; The project was supervised by A/Prof Steve Weller.</p><p>Jemima Jackson discussing her final year project titled &#34;High Performance Control of a Nine-phase Synchronous Reluctance Drive&#34; with her family. The project was supervised by Dr Colin Coates.</p><p>Tim Connell with his final year project titled &#34;Development of a Duected-Fan Miniature Aerial Vehicle.&#34; The project was supervised by Dr Chris Kellett.</p><p>Oliver Stein with his final year project titled &#34;Recognition of Iris Patterns.&#34; The project was supervised by Kaushik Mahata.</p>