For more information about studying the Bachelor of Mechanical Engineering (Honours) / Bachelor of Mechatronics Engineering (Honours)

Learn more

Program handbook

Description

A combined Mechanical and Mechatronics engineering degree provides the student with a significant skill set that will offer ongoing benefits. Mechanical engineers facilitate modern society by designing and developing items that function as key infrastructure. Though only a small area of mechanical engineering, the most recognisable mechanical engineering items are transportation devices including automobiles, trains, buses and aircraft. Mechatronics engineers originated from Mechanical engineers though with a particular focus on the implementation of control theory, computers and electronic hardware. The term Mechatronics is now well established and has its own distinct degree structure, which is still rooted in mechanical engineering. It is evident that a significant amount of mechatronics is involved in most modern mechanical devices, and this program recognises that a broader skill base will be necessary in the future of mechanical or mechatronics engineering.


Program learning outcomes

On successful completion of the program students will have:

  • Program Learning Outcomes as per those for the single degree programs.

Details

Information correct as atMar 29, 2024 9:05 am
Program code40363
AQF level

Level 8 Bachelor Honours Degree

Locations and UAC codes
Mode of delivery
  • Face to Face
Duration
  • Australian students - 5 years full-time or part-time equivalent.
  • International students - 5 years full-time.
Selection Rank
LocationSelection Rank
Callaghan Campus75.00-

This program is new for 2022, there is currently no commencing student profile available.

Find out more about Selection Ranks

Recommended studiesHSC Mathematics Extension 1 or equivalent. Study of one science-related subject would also be an advantage (Physics or Chemistry preferred).
Term typeSemesters
Fees
Relevant University rules and policies
CRICOS Code111374B

Click on the headings to show/hide sections of content. Hidden information will not be printed. Hide all sections

Admission information

Admission requirements

Eligibility for admission to this program is based on applicants meeting the minimum selection rank, or satisfying the requirements for an approved admission scheme.

The University of Newcastle accepts a range of qualifications to determine eligibility for admission. These include, but are not limited to, Australian or overseas senior secondary qualifications (such as the HSC), prior tertiary studies, prior TAFE/VET studies, and completed enabling programs.

 

 

For further information on the pathways that are available to you, please refer to:

 

 

 

Enrolling in mathematics - Maths placement test

Your degree includes either compulsory or optional courses in maths. To maximise your likelihood of academic success, it is recommended that you select the course which matches your existing knowledge and understanding of maths concepts.

Answer a few questions now to find out what mathematics you should enrol in.

English Language Requirements

All Applicants must demonstrate that they meet the University’s English proficiency requirement. Further information regarding English language proficiency requirements can be found at the English Language Proficiency for Admission Policy here.

  • IELTS Overall Minimum: 6
  • IELTS Sub Test Minimum: 6

Credit transfer

If you wish to apply for credit for studies completed at another institution, or if you are changing programs within the University and wish to transfer your credit to the new program, visit the University's credit website for more information on applying for credit.


Compulsory program requirements

Industrial Experience is a compulsory requirement of the program. It includes 4 weeks undertaken as part of your in program WIL experience (ENGG3000), and an additional 8 weeks (totaling 12 weeks).Students are encouraged to obtain and to report on a substantial block of this experience at one time, but several shorter periods, of not less than 2 weeks duration, will be accepted.

Further information on industrial experience is available here.

Compulsory program requirements - Review of progress

In addition to meeting the University's overall requirements for academic progression, students must satisfactorily complete the following courses to progress in their program.

ENGG4801B - Engineering Final Year Project B


Academic requirements for program completion

Total units required

400 units

Program duration

5 years full-time or part-time equivalent up to 12 years maximum.

International students studying this program on campus are required to enrol full time to comply with their student visa requirements and complete their study in the standard minimum program duration. International students requiring enrolment advice should review the program plan corresponding to the semester and year of commencement and can contact their Program Advisor at ProgramAdvice@newcastle.edu.au

Program requirements

For all combined programs and in accordance with the Program Management Procedure Manual - Coursework, the core and minimum requirements for each single degree component must be met in each combined program. This has been done economically, exploiting overlaps where possible, so that accreditation of either program is not compromised.

The Bachelor of Mechanical Engineering (Honours)/Bachelor of Mechatronics Engineering (Honours) is a five year program, students are required to complete 400 units, which is comprised of: 

  • 370 units of core courses;
  • 20 units of courses chosen from the Course List; and
  • 10 units are elective courses. 

Electives

Elective courses give students the opportunity to broaden their skills and knowledge in their own or another engineering discipline; or specialise in areas such as business, maths or science; or undertake study overseas. 

Step-out Information

The program has a duration of 5 years full time (or part time equivalent). It is possible for a student to 'step out' with a single degree award only and not complete the combined program they are enrolled in. In order to do this, a student would be required to complete all the single degree requirements for their preferred degree and may be required to complete any omitted courses that are not included in the combined degree.

A student wishing to 'step out' with a single degree from this combined program should contact their Program Convenor or Program Advisor (ProgramAdvice@newcastle.edu.au) for further information.  

Mathematics Pathways 

Students who do not meet the enrolment requisite for MATH1110 must take MATH1002 Foundational Studies in Mathematics. For these students, MATH1002 will count for 10 units of electives. Students undertaking this pathway will need to be aware of the 1000 level unit restrictions when enrolling in their remaining elective courses.

Additional Information

  • Students wishing to undertake this program on a part-time basis are advised to contact the Program Convenor or Program Advisor (ProgramAdvice@newcastle.edu.au) for advice on optimum selection of courses for part-time enrolment.
  • Please note that if you undertake courses that are not in your approved program, you will be liable for additional fees for those courses. This is in addition to the fees associated with your normal program of study.

Program planner

Current students program planner

Current students can plan their program using Program Planner.

Program Planner

Prospective student degree planner

If you're a prospective student considering studying this degree take a look at My Degree Planner to see what your study journey will look like.

Transition arrangements

As programs are regularly reviewed and updated, some students may experience changes to their program of study during the course of their enrolment, which may require transition arrangements.

Students affected by changes to their program are advised to review any documentation contained in the "Additional Documents" section in the first instance. Any further questions should be directed to the Program Convenor or Program Advisor (ProgramAdvice@newcastle.edu.au).


Program structure

Students can plan their program using Program Planner. It is recommended students review the program handbook in conjunction with using Program Planner.

Courses that are currently unavailable are hidden by default. You can show them by adjusting the advanced course filters above, or clicking the 'show all' links below each section.

Core

Complete the following core courses to fulfil the requirements of this program.

CodeTitleTerm / Location Units
CIVL1100Fundamentals of Engineering Mechanics
  • Trimester 3 - 2024 (Singapore) (Singapore)
  • Semester 2 - 2024 (Callaghan)
10 units
ELEC1310Introduction to Electrical Engineering
  • Trimester 1 - 2024 (Singapore) (Singapore)
  • Semester 2 - 2024 (Callaghan)
10 units
ELEC1710Digital and Computer Electronics 1
  • Trimester 3 - 2024 (Singapore) (Singapore)
  • Semester 2 - 2024 (Callaghan)
10 units
ENGG1003Introduction to Procedural Programming
  • Semester 1 - 2024 (Callaghan)
  • Trimester 3 - 2024 (Singapore) (Singapore)
10 units
ENGG1500Introduction to Professional Engineering
  • Semester 1 - 2024 (BCA Singapore)
  • Semester 1 - 2024 (Callaghan)
  • Trimester 3 - 2024 (Singapore) (Singapore)
10 units
MATH1110Mathematics for Engineering, Science and Technology 1
  • Summer 2 - 2024 (Callaghan)
  • Semester 1 - 2024 (Callaghan)
  • Trimester 3 - 2024 (Singapore) (Singapore)
  • Semester 2 - 2024 (Callaghan)
10 units
MATH1120Mathematics for Engineering, Science and Technology 2
  • Summer 2 - 2024 (Callaghan)
  • Trimester 1 - 2024 (Singapore) (Singapore)
  • Semester 1 - 2024 (BCA Singapore)
  • Semester 1 - 2024 (Callaghan)
  • Semester 2 - 2024 (Callaghan)
10 units
MECH1110Introduction to Mechanical Engineering Design
  • Trimester 1 - 2024 (Singapore) (Singapore)
  • Semester 1 - 2024 (Callaghan)
  • Trimester 3 - 2024 (Singapore) (Singapore)
10 units
MECH1750Engineering Materials 1
  • Trimester 1 - 2024 (Singapore) (Singapore)
  • Semester 2 - 2024 (Callaghan)
10 units
ELEC2320Electrical and Electronic Circuits
  • Semester 1 - 2024 (Callaghan)
  • Trimester 2 - 2024 (Singapore) (Singapore)
10 units
ELEC2430Circuits and Signals
  • Trimester 2 - 2024 (Singapore) (Singapore)
  • Semester 2 - 2024 (Callaghan)
10 units
ENGG2100Engineering Risk and Uncertainty
  • Trimester 1 - 2024 (Singapore) (Singapore)
  • Semester 1 - 2024 (BCA Singapore)
  • Semester 1 - 2024 (Callaghan)
10 units
ENGG2300Engineering Fluid Mechanics
  • Trimester 2 - 2024 (Singapore) (Singapore)
  • Semester 2 - 2024 (BCA Singapore)
  • Semester 2 - 2024 (Callaghan)
10 units
ENGG2440Modelling and Control
  • Trimester 2 - 2024 (Singapore) (Singapore)
  • Semester 2 - 2024 (Callaghan)
10 units
ENGG2500Sustainable Engineering Practice
  • Trimester 3 - 2024 (Singapore) (Singapore)
  • Semester 2 - 2024 (Callaghan)
10 units
MATH2310Calculus of Science and Engineering
  • Trimester 1 - 2024 (Singapore) (Singapore)
  • Semester 1 - 2024 (Callaghan)
  • Semester 2 - 2024 (Callaghan)
10 units
MECH2110Mechanical Engineering Design 1
  • Semester 1 - 2024 (Callaghan)
  • Trimester 2 - 2024 (Singapore) (Singapore)
10 units
MECH2360Dynamics of Machines
  • Semester 1 - 2024 (Callaghan)
  • Trimester 2 - 2024 (Singapore) (Singapore)
10 units
MECH2430Mechanics of Solids 1
  • Trimester 3 - 2024 (Singapore) (Singapore)
  • Semester 2 - 2024 (Callaghan)
10 units
AERO3600Embedded Control Systems
  • Semester 1 - 2024 (Callaghan)
10 units
ENGG3000Engineering Work Integrated LearningNot currently offered10 units
ENGG3300Machine Learning for Engineers
  • Trimester 3 - 2024 (Singapore) (Singapore)
  • Semester 2 - 2024 (Callaghan)
10 units
ENGG3500Managing Engineering Projects
  • Semester 1 - 2024 (BCA Singapore)
  • Semester 1 - 2024 (Callaghan)
  • Trimester 3 - 2024 (Singapore) (Singapore)
10 units
MCHA3400Embedded Systems Engineering
  • Semester 1 - 2024 (Callaghan)
10 units
MCHA3500Mechatronics Design 1
  • Semester 2 - 2024 (Callaghan)
10 units
MECH3110Mechanical Engineering Design 2
  • Trimester 1 - 2024 (Singapore) (Singapore)
  • Semester 1 - 2024 (Callaghan)
10 units
MECH3400Materials Science and Engineering 2
  • Trimester 1 - 2024 (Singapore) (Singapore)
  • Semester 1 - 2024 (Callaghan)
10 units
MECH3695Heat Transfer
  • Trimester 1 - 2024 (Singapore) (Singapore)
  • Semester 1 - 2024 (Callaghan)
10 units
MECH3720Thermodynamics
  • Trimester 1 - 2024 (Singapore) (Singapore)
  • Semester 2 - 2024 (Callaghan)
10 units
MECH3780Fluid Mechanics 2 and CFD
  • Trimester 2 - 2024 (Singapore) (Singapore)
  • Semester 2 - 2024 (Callaghan)
10 units
ENGG4440Nonlinear Control and Estimation
  • Semester 2 - 2024 (Callaghan)
10 units
ENGG4801AEngineering Final Year Project A
  • Semester 1 - 2024 (Callaghan)
  • Semester 2 - 2024 (Callaghan)
10 units
ENGG4801BEngineering Final Year Project B
  • Semester 1 - 2024 (Callaghan)
  • Semester 2 - 2024 (Callaghan)
10 units
MCHA4100Mechatronics Systems
  • Semester 1 - 2024 (Callaghan)
20 units
MCHA4400Vision-based Navigation
  • Semester 2 - 2024 (Callaghan)
10 units
MECH4410Mechanics of Solids 2 and FEA
  • Semester 1 - 2024 (Callaghan)
  • Trimester 2 - 2024 (Singapore) (Singapore)
10 units

Course List

Choose 20 units from the following course list.

CodeTitleTerm / Location Units
ELEC3400Signal Processing
  • Semester 1 - 2024 (Callaghan)
  • Trimester 3 - 2024 (Singapore) (Singapore)
10 units
ELEC3540Analog and Digital Communications
  • Trimester 1 - 2024 (Singapore) (Singapore)
  • Semester 2 - 2024 (Callaghan)
10 units
MECH3130Mechanics of Bulk Solids and ParticulatesNot currently offered10 units
RENE3000Solar and Wind
  • Semester 1 - 2024 (Callaghan)
10 units
ELEC4160Advanced Drives and Power Electronics
  • Semester 2 - 2024 (Callaghan)
10 units
MECH4220Bulk Materials Handling and Transportation
  • Semester 2 - 2024 (Callaghan)
10 units
MECH4580Computer Aided Engineering and Manufacturing
  • Semester 2 - 2024 (Callaghan)
10 units
MENG4210Medical and Industrial Electronic Product Design
  • Semester 1 - 2024 (Callaghan)
10 units

Electives

Electives 10 unit requirement

Complete 10 units of electives to fulfil the requirements of the program. Electives can be used to extend and complement your core studies with more courses in the same field of study, or from areas that might be of interest to you. Electives can be chosen from all courses available at the University that do not have any other conditions (such as a course requisite) applied to them.

10 units

Honours

This combined degree program uses the WAM as a measure for determining Honours. Please refer to the Bachelor Honours Policy for further detailed information. 


Additional information

Through the Pathways and Academic Learning Support Centre, students can access a free suite of NUPrep preparation courses as well as Academic Learning Support.

Aboriginal and Torres Strait Islander students can draw on the assistance and support provided by the Indigenous Student Support and Development service through the Wollotuka Institute.


International students

All International Students enrolled in the program will be provided with an orientation to familiarise them with the rules, expectations, facilities and services offered by the University. Please visit our International Students website to find out more about the support services available to international students.


Additional support

AccessAbility provides advice and reasonable adjustments to Students with a medical or health condition or disability. If you require adjustments to undertake your program, contact the Student Support Advisors - AccessAbility before semester or early in the semester. They will work with the College or School to ensure that this happens in a timely manner.

Please note: All students must fulfil the inherent requirements of the programs and courses they are undertaking. While reasonable adjustments can be made, these adjustments cannot compromise academic integrity. It is the student's responsibility to check all the requirements of courses, and consider the effects of any medical condition or disability on their ability to complete course requirements. More information is available online.

Bachelor of Mechanical Engineering (Honours) / Bachelor of Mechatronics Engineering (Honours)

UAC Code , Program Code 40363

Selection rank
Duration (FT)(PT)
Next start date

CRICOS Code , Program Code 40363

Indicative fee1
Duration (FT)
Next start date
Select your study options
Student type
Degree duration
Study location
Admission info

Selection rank

Duration (FT)(PT)

Next start date

UAC Code

Program Code 40363

This criteria is based on a full-time domestic student attending Callaghan campus. Please select your criteria to personalise your study options and your circumstances.

Apply via UAC

Indicative fee1

Duration (FT)

Next start date

English proficiency requirements IELTS overall minimum -
IELTS section minimum -

CRICOS Code

Program Code 40363

This criteria is based on a full-time international student attending Callaghan campus. Please select your criteria to personalise your study options and your circumstances.

Apply now