Mechanics of Solids

Course code MECH3440Units 10Level 3000Faculty of Engineering and Built EnvironmentSchool of Engineering

The course deals with relationships between the external loads applied to a deformable body and the intensity of internal forces acting within the body. Topics include shafts, beams, pressure vessels, plates and shells, residual stress due to plastic deformation, strain energy, impact, Castigliano's theorem, open and closed thin walled sections, hydrostatic stress/strain, 3D Mohr circle, properties of anisotropic materials, stress function, equilibrium equations, compatibility equations, stress distribution, stress intensity factor, superposition principle, leak before burst criterion, fracture toughness test methods, energy balance principle, limitations of S-N curve and K criterion in fatigue.

Available in 2015

Callaghan CampusSemester 2
UoN SingaporeTrimester 1
Previously offered in 2014
ObjectivesTo equip students with in-depth understanding of the course, and therefore they should be capable of applying gained knowledge to mechanical engineering design optimization, prediction of structure life span and failure prevention.
Content1. Torsion, Thin cyclinders and shells
2. Energy Method
3. Stress and Strain
4. Elastic stress-Strain Relations
5. Linear Elastic Stress Field in Cracked Bodies
6. Elastic-Plastic Stress in Cracked Bodies
7. Crack growth Based on Energy Balance
8. S-N curve approach
9. Fatigue and Environment-Assisted Fracture
Replacing Course(s)Not Applicable
TransitionNot Applicable
Industrial Experience0
Assumed KnowledgeEngineering mechanics: stress, strain, axial loading, bending movement,torsion bending, deflection of beams
Modes of DeliveryFlexible Delivery / Student Centred Learning
Internal Mode
Teaching MethodsLecture
Laboratory
Tutorial
Assessment Items
Essays / Written AssignmentsRegular Assessments
Examination: Formal.
Laboratory ExercisesExperiments and Laboratory Report
* Note, any modification to the above assessment arrangement will appear on the course outline normally issued in week 1.
Contact HoursLecture: for 2 hour(s) per Week for Full Term
Tutorial: for 2 hour(s) per Week for Full Term
Laboratory: for 6 hour(s) per Term for Full Term
Timetables2015 Course Timetables for MECH3440