Safety and Risk Management
Available in 2013
|Callaghan Campus||Semester 2|
Previously offered in 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004
Fundamental and application of risk management to process safety will be covered. Topics include: toxicology, industrial hygiene, source models, toxic release and dispersion models, fires and explosions, hazard identification, risk assessment and accident investigation techniques.
|Objectives||1. To develop an understanding of the fundamental principles underlying safety and risk management.
2. To understand issues related to the practical application of safety and risk management.
3. To establish expertise relevant to the practice of safety and risk management.
4. To develop management skills related to planning, developing and report writing activities.
5. To develop some understanding of the professional obligations related to the discipline of safety and risk management.
|Content||1. Introduction: safety and loss prevention, definition of hazard, risk and risk assessment, scope and outline of risk management, frequency and severity, intrinsic and extrinsic safety, risk balance, Pareto principle,epidemiological approach, hazard warning.
2. Identification of hazards and basic definitions: toxicity, flammability, sources of ignition, fires, explosions, ionising radiation,noise pollution, temperature and pressure deviations.
3. Fire protection: classification of fires, fundamentals of fire suppression, fire protection systems and facilities, thermal radiation.
4. Explosions and detonations: theoretical aspects of explosions, pressure relieving devices, dust explosions, BLEVEs.
5. Toxicity and safe handling of materials.
6. Hazard and operability studies (HAZOP): basic principles, explanation of guide wrds, procedures, critical examination of flowsheets.
7. Risk analysis; acceptable risks and safety priorities, cost of saving a life, frequency of accidents, safety check lists, fault trees, redundancy and voting systems, assessment of risks from complex plants.
8. Strengths and limitations of quantitative risk assessment, modelling, a systematic approach to risk reduction, human factors, management of process safety, insurance.
9. Industrial hygiene, identification MSDS, evaluating exposure to volatile toxicants.
10.Source models, flow of liquid through a hole, liquids through pipes - 2K method, vapour and gases through pipes, flashing liquids.
11.Toxic release and dispersion models, parameters affecting dispersion.
12.Fires and explosions, definitions, flammability characteristics of liquids and vapours.
|Modes of Delivery||Internal Mode|
|Contact Hours||Lecture: for 4 hour(s) per Week for Full Term|
|Timetables||2013 Course Timetables for CHEE6420|